Setting the local control modes
Setting the control modes
Note
Note
The default control modes are requested during the initial setup. You can change them later under the "Settings" menu.
Warning
Warning
external signals If external control signals (Yuso, Edmij, Frank Energie, ...) are active, the external control signal has priority and the default control modes will be used as fallback.
Tip
Tip
Full explanation Below is a brief description of the available control modes. For more information, see the document "Control modes of the MidTeQ PULSE EMS".
Under "Default working mode" choose for each type of device which type of control mode you want to use.
